WTB Spool for 9" Ford

JCChildress · 12-15-2011, 01:42 PM

I am looking for a used lightweight steel 40 spline spool for a 9" Ford. I prefer a Mark Williams. I also have for sale, a detroit locker out of a Nascar 9" rear. Call with any info (434) 665-9541.

Paul Hellenberg · 12-15-2011, 05:14 PM

Check you PM

JCChildress · 12-16-2011, 11:58 AM

I forgot to mention it needs to be for the 3.250 brg

mannymen · 12-16-2011, 04:01 PM

Doesn't the MW spool have to be run with their axles, due to the way they machine their units?

Mark Ugrich · 12-18-2011, 01:35 PM

I believe the splines are cut at the outer ends of the spool on MW stuff.

Adger Smith · 12-18-2011, 02:36 PM

M/W and Strange splines are the same on 40 spline. M/W are a different pitch on 35 spline and will not interchange with Strange. The M/W 40 spline spools I own all have the splines cut all the way to the end of the spool. The Strange are recessed up inside the spool and require axles that are full length and end in the proper position to get a full spline engagement.

12-15-2011, 01:42 PM	#1
JCChildress Member Join Date: Apr 2007 Posts: 198 Likes: 7 Liked 11 Times in 5 Posts	WTB Spool for 9" Ford I am looking for a used lightweight steel 40 spline spool for a 9" Ford. I prefer a Mark Williams. I also have for sale, a detroit locker out of a Nascar 9" rear. Call with any info (434) 665-9541.

12-15-2011, 05:14 PM	#2
Paul Hellenberg Member Join Date: Nov 2005 Location: 41035 Posts: 243 Likes: 3 Liked 0 Times in 0 Posts	Re: WTB Spool for 9" Ford Check you PM __________________ Paul Hellenberg 3881 SS and STK paul@hellenberg.us

12-16-2011, 11:58 AM	#3
JCChildress Member Join Date: Apr 2007 Posts: 198 Likes: 7 Liked 11 Times in 5 Posts	Re: WTB Spool for 9" Ford I forgot to mention it needs to be for the 3.250 brg

12-16-2011, 04:01 PM	#4
mannymen Senior Member Join Date: Apr 2003 Posts: 728 Likes: 5 Liked 13 Times in 7 Posts	Re: WTB Spool for 9" Ford Doesn't the MW spool have to be run with their axles, due to the way they machine their units? __________________ N/A

12-18-2011, 01:35 PM	#5
Mark Ugrich Member Join Date: May 2011 Location: Auburndale,Florida Posts: 220 Likes: 29 Liked 71 Times in 38 Posts	Re: WTB Spool for 9" Ford I believe the splines are cut at the outer ends of the spool on MW stuff.

12-18-2011, 02:36 PM	#6
Adger Smith VIP Member Join Date: Dec 2001 Location: Texarkana Ark/TX Posts: 2,446 Likes: 575 Liked 880 Times in 311 Posts	Re: WTB Spool for 9" Ford M/W and Strange splines are the same on 40 spline. M/W are a different pitch on 35 spline and will not interchange with Strange. The M/W 40 spline spools I own all have the splines cut all the way to the end of the spool. The Strange are recessed up inside the spool and require axles that are full length and end in the proper position to get a full spline engagement. __________________ Adger Smith (Former SS) Last edited by Adger Smith; 12-18-2011 at 02:37 PM. Reason: sp