Stock Eliminator Questions From A Dummy
Guys
I'm an old bracket racer tired of racing all the electronics and looking to build a stock eliminator car with a 1977 305 sbc motor and looking for recommendations on heads and intake and carb can run with two or 4 barrel. And also have a couple of other questions can you replace seats with aftermarket seats and can you replace factory glass with Lexan. Have read rulebook and don't seem smart enough to understand the wording. Any help would be appreciated. Bill |
Re: Stock Eliminator Questions For A Dummy
start going throgh the classifications guides and find a engine/body combo that you like and is easily available.
The carb, heads and manifold will be what came stock on that combo and in 77 there are no dual carb setups. |
Re: Stock Eliminator Questions For A Dummy
David we are looking at a 1977 Nova the car was available with either a 2 barrel or a 4 barrel
Thanks Bill |
Re: Stock Eliminator Questions For A Dummy
No Lexan, Body and interior must remain stock, beside new rule of the racing seats are allowed
|
Re: Stock Eliminator Questions For A Dummy
305 is a 2 barrel
350 is 4 barrel |
Re: Stock Eliminator Questions For A Dummy
Yes Bill your right I didn't post that properly we are looking at both.
I still cant understand the rule on the glass in the rulebook it says to see gen regs 7:8 and by that it says that they can be lexan thanks bill |
Re: Stock Eliminator Questions For A Dummy
Quote:
|
Re: Stock Eliminator Questions For A Dummy
was looking at a 2 bl 350 combo and the head castings of
993, 333881,and 333882 any thoughts on with one is the best? |
Re: Stock Eliminator Questions For A Dummy
Quote:
|
All times are GMT -4. The time now is 06:43 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.