CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   SBC EFI fuel rails (https://classracer.com/classforum/showthread.php?t=61629)

Dragsinger 03-21-2016 08:14 PM
SBC EFI fuel rails
 
I am in need of SBC EFI fuel rails that have conventional SBC port spacing with #10 AN O ring threads at each end

Dragsinger 03-21-2016 09:16 PM
Re: SBC EFI fuel rails
 
Edelbrock #3630 has 3/8 pipe thread so I can use adapters to #10 AN.

That is the best option I see so far

Dragsinger 03-21-2016 09:35 PM
Re: SBC EFI fuel rails
 
2 Attachment(s)
this shows a factory fuel rail test fit. It does not have enough material to thread 3/8" pipe.

Ed Wright 03-21-2016 09:43 PM
Re: SBC EFI fuel rails
 
This your Super Stock engine? If so, why would you need -10 lines?

Dragsinger 03-21-2016 10:02 PM
Re: SBC EFI fuel rails
 
3 Attachment(s)
Ed,

it is our 417" SBC bracket engine.

Fuel cell, fuel filter, fuel pump, fuel regulator all #10

Holley EFI system

Dragsinger 03-21-2016 10:05 PM
Re: SBC EFI fuel rails
 
Ed,

we are definitely form one extreme to the other. With the Super 10 I am installing a 4GC

Rat Raceway 03-21-2016 10:57 PM
Re: SBC EFI fuel rails
 
Not sure it will help...

What about a weld on fitting? That is how I did mine this last go around...

http://www.locashdyno.com/store2/ind...roducts_id=324

FED 387 03-21-2016 11:16 PM
Re: SBC EFI fuel rails
 
Larry --check your emails good contact info Dick


All times are GMT -4. The time now is 12:40 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.