CLASS RACER FORUM - View Single Post

Rich Biebel · 06-24-2013, 07:31 PM

Tom Goldman was familair with Gen 6 Accel units as I recall...

I had a Gen 7 Accel....and they are a lot different....

Woodro used Holley's as many did I think...

A data logger or an A/F data recorder is very helpfull

I had both but used an Innovate LM-1 mostly....and was way off in some areas...mostly low speed part throttle.....wide open down track was not too bad....but consistancy and predictability was not good...in some conditions....

You have a very steep learning curve and it is not fun...but once it is setup right...they work fine...

06-24-2013, 07:31 PM	#2
Rich Biebel VIP Member Join Date: Jun 2007 Location: Northern New Jersey suburbs Posts: 2,314 Likes: 25 Liked 544 Times in 213 Posts	Re: Help with Accel Calmap 6.0 Tom Goldman was familair with Gen 6 Accel units as I recall... I had a Gen 7 Accel....and they are a lot different.... Woodro used Holley's as many did I think... A data logger or an A/F data recorder is very helpfull I had both but used an Innovate LM-1 mostly....and was way off in some areas...mostly low speed part throttle.....wide open down track was not too bad....but consistancy and predictability was not good...in some conditions.... You have a very steep learning curve and it is not fun...but once it is setup right...they work fine... __________________ Rich Biebel S/C 1479 Stock 147R