CLASS RACER FORUM - View Single Post

Ron Miller · 01-30-2014, 11:59 AM

I have been using Dow Corning Molykote 321D Dry Film with good success. Open link on the right,,,,,, http://www.firstpowergroupllc.com/DC...lykote_321.pdf. I also use Isky Rev Lube on the lobes, use a Gibbs break in oil, , and set the springs up soft by using a + .050 lock. The + .050 will drop the spring pressure 20 to 30 lbs. After the cam has a chance to run in and things are OK. I change out the + .050 locks for a standard one.

01-30-2014, 11:59 AM	#3
Ron Miller Member Join Date: Mar 2002 Location: Brownstown, Mi 48134 Posts: 196 Likes: 35 Liked 13 Times in 7 Posts	Re: Blaster Graphite dry lube I have been using Dow Corning Molykote 321D Dry Film with good success. Open link on the right,,,,,, http://www.firstpowergroupllc.com/DC...lykote_321.pdf. I also use Isky Rev Lube on the lobes, use a Gibbs break in oil, , and set the springs up soft by using a + .050 lock. The + .050 will drop the spring pressure 20 to 30 lbs. After the cam has a chance to run in and things are OK. I change out the + .050 locks for a standard one.