|
|
![]() |
#1 |
Member
Join Date: Mar 2002
Location: Brownstown, Mi 48134
Posts: 196
Likes: 35
Liked 13 Times in 7 Posts
|
![]()
I have been using Dow Corning Molykote 321D Dry Film with good success. Open link on the right,,,,,, http://www.firstpowergroupllc.com/DC...lykote_321.pdf. I also use Isky Rev Lube on the lobes, use a Gibbs break in oil, , and set the springs up soft by using a + .050 lock. The + .050 will drop the spring pressure 20 to 30 lbs. After the cam has a chance to run in and things are OK. I change out the + .050 locks for a standard one.
|
![]() |
![]() |
![]() |
|
|