[1720]

This is what was suggested to us, for our Bracket cars:

Drag Racing Chassis Setup
(For stock type chassis)

Here is the alignment info.

Toe-in = 1/16"

Caster – 3 - 4 deg.

Camber = 0 (at ride height raised up 3”)

Driver’s weight must be in left seat.


Re: drag race alignment specs
Camber is zero but as the front end rises on launch, the camber goes out the window.

Caster - as much as you can get. About 5 degrees on both sides.

Toe would be good at zero but around 1/16" toe in is preferred.