CLASS RACER FORUM - View Single Post

MikeMoller · 06-28-2016, 06:55 PM

Basically you want the converter about an 1/8 inch from bottoming out on the pump lugs.With the converter bottomed out on the pump, measure the lug to flexplate distance, subtract 1/8 inch (.125) and that is the spacer(s) needed. That is how I installed mine and no issues.

06-28-2016, 06:55 PM	#3
MikeMoller Senior Member Join Date: May 2010 Location: Raleigh NC Posts: 637 Likes: 27 Liked 254 Times in 78 Posts	Re: Metric 200 question Basically you want the converter about an 1/8 inch from bottoming out on the pump lugs.With the converter bottomed out on the pump, measure the lug to flexplate distance, subtract 1/8 inch (.125) and that is the spacer(s) needed. That is how I installed mine and no issues. __________________ Mike Moller NHRA 203 Q-R-T/SA