|
|
|
|
06-28-2016, 06:55 PM
|
#1 |
|
Senior Member
Join Date: May 2010
Location: Raleigh NC
Posts: 637
Likes: 27
Liked 254 Times in 78 Posts
|
Re: Metric 200 question
Basically you want the converter about an 1/8 inch from bottoming out on the pump lugs.With the converter bottomed out on the pump, measure the lug to flexplate distance, subtract 1/8 inch (.125) and that is the spacer(s) needed. That is how I installed mine and no issues.
__________________
Mike Moller NHRA 203 Q-R-T/SA |
|
|
 |
|
|
Hybrid Mode
