CLASS RACER FORUM - View Single Post

Capri · 11-21-2020, 08:09 PM

If you DO drill the wheels, wait til you get the studs. Now you are potentially looking at drilling and taping the axles,and front hubs also. On top of that, I am not aware of any sleeves made to go around the stud to sit between the wheel and stud. Just the larger nut and exterior washer. Most of the wheels I have had my hands on slip right over the "5/8" stud fairly tight tolerance. only had one a tad sloppy. Then just a half inch spacer and torque em at 85.

11-21-2020, 08:09 PM	#4
Capri Member Join Date: Apr 2004 Posts: 171 Likes: 0 Liked 27 Times in 14 Posts	Re: Lug Nuts If you DO drill the wheels, wait til you get the studs. Now you are potentially looking at drilling and taping the axles,and front hubs also. On top of that, I am not aware of any sleeves made to go around the stud to sit between the wheel and stud. Just the larger nut and exterior washer. Most of the wheels I have had my hands on slip right over the "5/8" stud fairly tight tolerance. only had one a tad sloppy. Then just a half inch spacer and torque em at 85.