Alf Wiebe contact info

Dustin Chase · 08-06-2007, 10:59 PM

Anyone?

thanks

7820 · 08-07-2007, 12:42 AM

Good luck....I have tried for a few months without success.

Dustin Chase · 08-07-2007, 08:48 AM

I hear his rear suspensions for A body are the way to, if any body sells them for him that would work too. Dick millers look good too. I guess we'll try that. Any thoughts are appreciated.

Thanks

Alan Roehrich · 08-07-2007, 09:07 AM

Word has it that Alf is not building suspension kits anymore, at least for the time being. You might also look at the HR Parts setup.

SSDiv6 · 08-07-2007, 09:20 AM

Go with the Global West control arms in lieu of the Dick Miller stuff.

Dustin Chase · 08-07-2007, 11:59 AM

sorry double post.

Dustin Chase · 08-07-2007, 11:59 AM

Guess I should mention this is on a 70 Chevelle with 454. Ill check out the global west stuff,

thanks

chris ok · 08-07-2007, 12:58 PM

I have a 70 chevelle 454 I have the HR Parts n stuff. real high quality. I use the rear bolt in anti roll bar with NO front sway bar. car drives great. anyone have a 396 or a 454 engine for a 70 stock or super stock that needs some testing in a real SS car : ) does anyone run super stock with stock stlye suspension and a 11" tire?

Dustin Chase · 08-07-2007, 02:15 PM

Is there a website for the HR stuff and are weld in anti roll bars legal in stock.

thanks

Greg Barsamian · 08-07-2007, 02:58 PM

Check out these parts from BMR. Our customer picked up quite a bit with the rear sway bar!
http://www.bmrfabrication.com/A-Body.htm

08-06-2007, 10:59 PM	#1
Dustin Chase Junior Member Join Date: Jun 2007 Location: Pampa Texas Posts: 31 Likes: 0 Liked 0 Times in 0 Posts	Alf Wiebe contact info Anyone? thanks __________________ Dustin Chase Comp 470 K/A

08-07-2007, 12:42 AM	#2
7820 Member Join Date: Jul 2007 Posts: 201 Likes: 0 Liked 0 Times in 0 Posts	Re: Alf Wiebe contact info Good luck....I have tried for a few months without success.

08-07-2007, 08:48 AM	#3
Dustin Chase Junior Member Join Date: Jun 2007 Location: Pampa Texas Posts: 31 Likes: 0 Liked 0 Times in 0 Posts	Re: Alf Wiebe contact info I hear his rear suspensions for A body are the way to, if any body sells them for him that would work too. Dick millers look good too. I guess we'll try that. Any thoughts are appreciated. Thanks __________________ Dustin Chase Comp 470 K/A

08-07-2007, 09:07 AM	#4
Alan Roehrich Veteran Member Join Date: May 2006 Location: Murfreesboro TN Posts: 5,110 Likes: 1,570 Liked 1,811 Times in 412 Posts	Re: Alf Wiebe contact info Word has it that Alf is not building suspension kits anymore, at least for the time being. You might also look at the HR Parts setup. __________________ Alan Roehrich 212A G/S

08-07-2007, 09:20 AM	#5
SSDiv6 VIP Member Join Date: Feb 2003 Location: Glendale, Arizona Posts: 3,044 Likes: 712 Liked 1,579 Times in 582 Posts	Re: Alf Wiebe contact info Go with the Global West control arms in lieu of the Dick Miller stuff.

08-07-2007, 11:59 AM	#6
Dustin Chase Junior Member Join Date: Jun 2007 Location: Pampa Texas Posts: 31 Likes: 0 Liked 0 Times in 0 Posts	Re: Alf Wiebe contact info sorry double post. __________________ Dustin Chase Comp 470 K/A

08-07-2007, 11:59 AM	#7
Dustin Chase Junior Member Join Date: Jun 2007 Location: Pampa Texas Posts: 31 Likes: 0 Liked 0 Times in 0 Posts	Re: Alf Wiebe contact info Guess I should mention this is on a 70 Chevelle with 454. Ill check out the global west stuff, thanks __________________ Dustin Chase Comp 470 K/A

08-07-2007, 12:58 PM	#8
chris ok Senior Member Join Date: Jul 2002 Location: Long Island, New york Posts: 592 Likes: 131 Liked 46 Times in 29 Posts	Re: Alf Wiebe contact info I have a 70 chevelle 454 I have the HR Parts n stuff. real high quality. I use the rear bolt in anti roll bar with NO front sway bar. car drives great. anyone have a 396 or a 454 engine for a 70 stock or super stock that needs some testing in a real SS car : ) does anyone run super stock with stock stlye suspension and a 11" tire?

08-07-2007, 02:15 PM	#9
Dustin Chase Junior Member Join Date: Jun 2007 Location: Pampa Texas Posts: 31 Likes: 0 Liked 0 Times in 0 Posts	Re: Alf Wiebe contact info Is there a website for the HR stuff and are weld in anti roll bars legal in stock. thanks __________________ Dustin Chase Comp 470 K/A

08-07-2007, 02:58 PM	#10
Greg Barsamian VIP Member Join Date: Jan 2002 Location: Central Massachusetts Posts: 1,400 Likes: 714 Liked 417 Times in 96 Posts	Re: Alf Wiebe contact info Check out these parts from BMR. Our customer picked up quite a bit with the rear sway bar! http://www.bmrfabrication.com/A-Body.htm