|
|
05-11-2017, 02:31 PM
|
#1 |
|
Member
Join Date: Nov 2016
Location: Indianola Washington
Posts: 396
Likes: 0
Liked 450 Times in 145 Posts
|
68-70 Nova Stocker Pinion Angle
SB 350 Stocker 12 Bolt. TH 200 Transmission, with Caltrac bars and Mono Leaf springs. What would be the proper Pinion angle to start with
 Thks for the Help  .
|
|
|
|
05-11-2017, 03:01 PM
|
#2 |
|
Member
Join Date: Dec 2012
Posts: 227
Likes: 4
Liked 162 Times in 45 Posts
|
Re: 68-70 Nova Stocker Pinion Angle
Some is good, a little more is better. More is better. If you have trouble hooking the driveshaft it, it mite be too much. Dont be bashfull!
|
|
|
|
|
05-11-2017, 03:32 PM
|
#3 |
|
Member
Join Date: Apr 2005
Location: Bethany La.
Posts: 322
Likes: 95
Liked 169 Times in 53 Posts
|
Re: 68-70 Nova Stocker Pinion Angle
I run 3 degrees down on ours.
__________________
Bill Bogues 4696 STK |
|
|
|
|
05-11-2017, 07:13 PM
|
#4 |
|
Senior Member
Join Date: Oct 2002
Location: Mahopac, NY
Posts: 666
Likes: 48
Liked 113 Times in 9 Posts
|
Re: 68-70 Nova Stocker Pinion Angle
6 degrees here in NY
__________________
Joe DeMarzo 1317 STK |
|
|
|
|
05-11-2017, 07:35 PM
|
#5 |
|
Member
Join Date: Nov 2016
Location: Indianola Washington
Posts: 396
Likes: 0
Liked 450 Times in 145 Posts
|
Re: 68-70 Nova Stocker Pinion Angle
Its at .06 now. Was going to install 2 degree wedges to start but maybe I should install the 4 degrees and see if it likes it to start. Anybody play with a pyrometer readings at the U joints?, checking temps with Pinion angle changes to determine best angle. Thinking is, closer the angle is under a load, the less heat is being generated by the U joint as it rotates.
|
|
|
|
|
05-11-2017, 08:12 PM
|
#6 |
|
VIP Member
Join Date: Jun 2009
Location: Boulder City, Nevada 89005
Posts: 2,708
Likes: 2,734
Liked 2,399 Times in 679 Posts
|
Re: 68-70 Nova Stocker Pinion Angle
Just a couple or three degrees in Boulder City works great.
__________________
John Irving 741 Stock 741 Super Stock |
|
|
|
|
05-11-2017, 09:21 PM
|
#7 |
|
Member
Join Date: Dec 2003
Location: Houston
Posts: 309
Likes: 26
Liked 29 Times in 15 Posts
|
Re: 68-70 Nova Stocker Pinion Angle
Call Travis at Calvert racing.
|
|
|
 |
|
|
Linear Mode
