4 wheel disc brakes

Robbie Welch · 08-05-2013, 04:03 PM

I've been doing needed updates to the old Fairlane. We built new headers 1 3/4 stepped to 1 7/8 there at Nitroplate getting coated. So while that's being done I thought I'd replace the 4 wheel (stock) drum brakes with strange 4 wheel disc. My question is what size bore master cylinder should I use? I asked the techs at strange and a friend that's done lots of dirt car brakes but got different answers from both of them. I also took the master cylinder off the car and measured the bore it was 1" and worked great with the drum brakes. Any help would be greatly appreciated

08-05-2013, 04:03 PM	#1
Robbie Welch Live Reporter Join Date: Sep 2005 Location: Golden Beach Maryland Posts: 1,234 Likes: 55 Liked 262 Times in 124 Posts	4 wheel disc brakes I've been doing needed updates to the old Fairlane. We built new headers 1 3/4 stepped to 1 7/8 there at Nitroplate getting coated. So while that's being done I thought I'd replace the 4 wheel (stock) drum brakes with strange 4 wheel disc. My question is what size bore master cylinder should I use? I asked the techs at strange and a friend that's done lots of dirt car brakes but got different answers from both of them. I also took the master cylinder off the car and measured the bore it was 1" and worked great with the drum brakes. Any help would be greatly appreciated