SBC Oiling

rboyle · 12-10-2017, 08:29 PM

Freshening my 350/287 hp motor and the oil pan that was on it looks like a Milodon with a trap door and baffle on the passenger side. I have a 1965 Corvette oil pan and pickup with windage tray, crank scraper and oil pump plate that sandwiches betwwen the pump and rear main cap. Mellings HV oil pump too. Any recomendations on which pan and wether to use the scraper or windage tray (Corvette original too) and also feelings on the lifter valley shield.
Thanks in advance
Rich Boyle

12-10-2017, 08:29 PM	#1
rboyle Senior Member Join Date: Jan 2015 Posts: 604 Likes: 1,454 Liked 586 Times in 162 Posts	SBC Oiling Freshening my 350/287 hp motor and the oil pan that was on it looks like a Milodon with a trap door and baffle on the passenger side. I have a 1965 Corvette oil pan and pickup with windage tray, crank scraper and oil pump plate that sandwiches betwwen the pump and rear main cap. Mellings HV oil pump too. Any recomendations on which pan and wether to use the scraper or windage tray (Corvette original too) and also feelings on the lifter valley shield. Thanks in advance Rich Boyle