Shift on time or RPM

Racer4077 · 12-18-2011, 09:19 PM

I would like to know peoples thoughts on shifting on the throttle stop. I have my TS coming on .200 after the hit...on for 2.500 (give or take). I have tried both shifting on RPM and time. I have been more consistant by shifting at RPM, but run a little more MPH on time shift. So I wanted to see what you guys are doing and what works.

Chris Williams · 12-18-2011, 11:19 PM

I'm in the time camp. Way more consistent for me. Car climbs when on the stop otherwise. But YMMV.

Mickey Whaley · 12-19-2011, 01:34 AM

Time is Time does it change? Stick to time unless u blow the tires off

Racer4077 · 12-19-2011, 09:02 PM

if my stop comes on @ .2....when do i shift? I'm on the stop for 2.5....

I've set it before at .7, but was thinking its too quick. any thoughts?

Chuck Westcott · 12-19-2011, 10:32 PM

.2 on the stop is a good hit !
.80 on the shift is good for me with a stop RPM @ 4200 puts me close to a .90 run @ 165 or so in S/Gas Trim.
Your Stop RPM is important to be consistant if you running S/Gas or S/Comp.Alway's check stop RPM at every track !

Racer4077 · 12-20-2011, 01:05 PM

Thanks for the info. Chuck. Sounds good to me. I will try it. I have another question for you if you don't mind. If my stall RPM is 5600, what should my on the stop RPM be? I was told to set it at 500 RPM lower than my stall, but I have had problems doing that and running a consistant number.

12-18-2011, 09:19 PM	#1
Racer4077 Junior Member Join Date: Mar 2011 Location: Midland, TX Posts: 12 Likes: 0 Liked 0 Times in 0 Posts	Shift on time or RPM I would like to know peoples thoughts on shifting on the throttle stop. I have my TS coming on .200 after the hit...on for 2.500 (give or take). I have tried both shifting on RPM and time. I have been more consistant by shifting at RPM, but run a little more MPH on time shift. So I wanted to see what you guys are doing and what works.

12-18-2011, 11:19 PM	#2
Chris Williams Member Join Date: Mar 2009 Location: Woodinville, WA Posts: 401 Likes: 0 Liked 0 Times in 0 Posts	Re: Shift on time or RPM I'm in the time camp. Way more consistent for me. Car climbs when on the stop otherwise. But YMMV. __________________ Chris Williams 6304 SC, TD, ET

12-19-2011, 01:34 AM	#3
Mickey Whaley VIP Member Join Date: Dec 2006 Posts: 1,220 Likes: 0 Liked 1 Time in 1 Post	Re: Shift on time or RPM Time is Time does it change? Stick to time unless u blow the tires off

12-19-2011, 09:02 PM	#4
Racer4077 Junior Member Join Date: Mar 2011 Location: Midland, TX Posts: 12 Likes: 0 Liked 0 Times in 0 Posts	Re: Shift on time or RPM if my stop comes on @ .2....when do i shift? I'm on the stop for 2.5.... I've set it before at .7, but was thinking its too quick. any thoughts?

12-19-2011, 10:32 PM	#5
Chuck Westcott Member Join Date: Dec 2003 Location: Brownsburg,Indiana Posts: 326 Likes: 0 Liked 0 Times in 0 Posts	Re: Shift on time or RPM .2 on the stop is a good hit ! .80 on the shift is good for me with a stop RPM @ 4200 puts me close to a .90 run @ 165 or so in S/Gas Trim. Your Stop RPM is important to be consistant if you running S/Gas or S/Comp.Alway's check stop RPM at every track ! __________________ Chuck Westcott- S/C -S/G 225

12-20-2011, 01:05 PM	#6
Racer4077 Junior Member Join Date: Mar 2011 Location: Midland, TX Posts: 12 Likes: 0 Liked 0 Times in 0 Posts	Re: Shift on time or RPM Thanks for the info. Chuck. Sounds good to me. I will try it. I have another question for you if you don't mind. If my stall RPM is 5600, what should my on the stop RPM be? I was told to set it at 500 RPM lower than my stall, but I have had problems doing that and running a consistant number.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode