3rd Generation [1982 - 1992] Camaro/Firebird hood scoop

Dragsinger · 07-21-2009, 09:44 AM

Racers,

Under construction is my 1990 Firebird, manual shift, tunnel ram, small block combination.

Ideas/options are needed for the hood & scoop. The plan is for a forward facing scoop, as low as possible yet give sufficient room over the carbs. One valid consideration is to have the scoop mounted on the carbs, then slide a flat hood around the scoop. [like a Comp or Pro Stock set up]

It will be a big help if some pics can be posted. Let me know what you have. Please send a PM for my email if you want to email pics.

Thanks

buzzinhalfdozen · 07-21-2009, 09:55 AM

If this is to be a SS car, hoodscoop must be part of hood, I believe this is also the case in most comp classes. Go to autoimagery and put in super stock you can see alot of different scoop combos there. Joe

Dragsinger · 07-21-2009, 11:12 AM

no class rules, this is an association of stick racers built along the lines of Modified or Comp class cars. I am fully aware of the the web site photos but that is not enough detail.

My hope is to find a few specific examples with detail photos

Dragsinger · 07-21-2009, 12:54 PM

got it handled, will post photos later of the completed project

07-21-2009, 09:44 AM	#1
Dragsinger VIP Member Join Date: Jul 2008 Location: Liberty City [East Texas] Posts: 1,760 Likes: 5 Liked 99 Times in 60 Posts	3rd Generation [1982 - 1992] Camaro/Firebird hood scoop Racers, Under construction is my 1990 Firebird, manual shift, tunnel ram, small block combination. Ideas/options are needed for the hood & scoop. The plan is for a forward facing scoop, as low as possible yet give sufficient room over the carbs. One valid consideration is to have the scoop mounted on the carbs, then slide a flat hood around the scoop. [like a Comp or Pro Stock set up] It will be a big help if some pics can be posted. Let me know what you have. Please send a PM for my email if you want to email pics. Thanks __________________ Larry Woodfin 471W

07-21-2009, 09:55 AM	#2
buzzinhalfdozen Senior Member Join Date: Sep 2006 Location: Bellevue Ohio Posts: 984 Likes: 0 Liked 11 Times in 8 Posts	Re: 3rd Generation [1982 - 1992] Camaro/Firebird hood scoop If this is to be a SS car, hoodscoop must be part of hood, I believe this is also the case in most comp classes. Go to autoimagery and put in super stock you can see alot of different scoop combos there. Joe __________________ Joe Buchanan SS/BX 3117

07-21-2009, 11:12 AM	#3
Dragsinger VIP Member Join Date: Jul 2008 Location: Liberty City [East Texas] Posts: 1,760 Likes: 5 Liked 99 Times in 60 Posts	Re: 3rd Generation [1982 - 1992] Camaro/Firebird hood scoop no class rules, this is an association of stick racers built along the lines of Modified or Comp class cars. I am fully aware of the the web site photos but that is not enough detail. My hope is to find a few specific examples with detail photos __________________ Larry Woodfin 471W

07-21-2009, 12:54 PM	#4
Dragsinger VIP Member Join Date: Jul 2008 Location: Liberty City [East Texas] Posts: 1,760 Likes: 5 Liked 99 Times in 60 Posts	Re: 3rd Generation [1982 - 1992] Camaro/Firebird hood scoop got it handled, will post photos later of the completed project __________________ Larry Woodfin 471W