Aa/sa class dq at denver - Page 2

Larry Hill · 07-21-2019, 07:10 PM

Carroll Shelby the notorious re-boxer

Billy Nees · 07-21-2019, 07:22 PM

Quote:

Originally Posted by Larry Hill

Carroll Shelby the notorious re-boxer

Larry, don't you think that there's enough blame to go around to ALL of the manufacturers (Shelby is considered a manufacturer by the NHRA)? AND more than a couple of well-connected engine builders.

Larry Hill · 07-21-2019, 08:15 PM

Rods @ 2.200 instead of 2.437, crank, cam with more lift than the 427, Dove heads, 68 PI alum intake, 735 to 780, Carroll whored it all up

B Parker · 07-21-2019, 10:12 PM

Larry you forgot the special edition aluminum drive shaft. I saw it myself and had to ask. Funny thing back in 67 I don't think even the pro Stockers knew about them. BP

Race Clean · 07-22-2019, 01:15 PM

Quote:

Originally Posted by Larry Hill

Rods @ 2.200 instead of 2.437, crank,

Anyone more than me that think that option would be for all Bigblocks or none?

Mike Gray · 07-22-2019, 03:30 PM

Quote:

Originally Posted by Race Clean

If you have a 67 GT500 you better have the correct info from the engine builder

Did I read the guide right?10 different hp rating depending on the parts you have installed, and one replacement head adds 37hp,close to the stock head in performance??
Who let Stock become the joke it is today?

10 doesn't sound like to many, I counted 17 for the 396 '69 Camaro!
Don't pick on me until I get it finished, hopefully some day. I started from scratch which was a bad idea. If you want to know the combo I picked, it will be a natural A car and yes I'm using 2.200 rods from the approved list.

X-TECH MAN · 07-22-2019, 04:13 PM

Quote:

Originally Posted by race clean

if you have a 67 gt500 you better have the correct info from the engine builder:d
did i read the guide right?10 different hp rating depending on the parts you have installed, and one replacement head adds 37hp,close to the stock head in performance??
Who let stock become the joke it is today?

who= NHRA That's who !!!!

Jim Bailey · 07-22-2019, 05:18 PM

I've watched this transpire for a while now, and it finally looks like the racers have had enough. Based on what I saw in Division 3 recently, if your sh**s bogus you're gonna get called out. For good reason. Look for more of this throughout all divisions. If NHRA won't do it, look for their hand to get forced by the racers themselves.... It's our option !... If you're a honored one to be selected in a protest, tear it down and take the money, or pull your pants down …. This always has been a part of stk/ss racing! #itsnotbracketracing

Frank Castros · 07-22-2019, 05:32 PM

I've always said the single 4 barrel NASCAR HEMI in the classification guide is a farce. Bogus intake manifold and hood scoop. Have you ever seen a vintage photo of an actual NASCAR HEMI from 1964-65 with a hood scoop or a '66 HEMI Belvedere with a scoop, if so why didn't Jere Stahl have one?
I'm MoPar through and through but give me a break.

X-TECH MAN · 07-22-2019, 05:43 PM

Quote:

Originally Posted by Frank Castros

I've always said the single 4 barrel NASCAR HEMI in the classification guide is a farce. Bogus intake manifold and hood scoop. Have you ever seen a vintage photo of an actual NASCAR HEMI from 1964-65 with a hood scoop or a '66 HEMI Belvedere with a scoop, if so why didn't Jere Stahl have one?
I'm MoPar through and through but give me a break.

Wrong carburetor also allowed on the 64/65 single 4 hemi !

07-21-2019, 07:10 PM	#11
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,640 Likes: 1,937 Liked 10,712 Times in 2,230 Posts	Re: Aa/sa class dq at denver Carroll Shelby the notorious re-boxer __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817

07-21-2019, 08:15 PM	#13
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,640 Likes: 1,937 Liked 10,712 Times in 2,230 Posts	Re: Aa/sa class dq at denver Rods @ 2.200 instead of 2.437, crank, cam with more lift than the 427, Dove heads, 68 PI alum intake, 735 to 780, Carroll whored it all up __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817

07-21-2019, 10:12 PM	#14
B Parker Senior Member Join Date: Sep 2009 Posts: 849 Likes: 980 Liked 2,336 Times in 464 Posts	Re: Aa/sa class dq at denver Larry you forgot the special edition aluminum drive shaft. I saw it myself and had to ask. Funny thing back in 67 I don't think even the pro Stockers knew about them. BP

07-22-2019, 05:18 PM	#18
Jim Bailey Senior Member Join Date: Aug 2004 Posts: 674 Likes: 15 Liked 584 Times in 94 Posts	Re: Aa/sa class dq at denver I've watched this transpire for a while now, and it finally looks like the racers have had enough. Based on what I saw in Division 3 recently, if your sh**s bogus you're gonna get called out. For good reason. Look for more of this throughout all divisions. If NHRA won't do it, look for their hand to get forced by the racers themselves.... It's our option !... If you're a honored one to be selected in a protest, tear it down and take the money, or pull your pants down …. This always has been a part of stk/ss racing! #itsnotbracketracing

07-22-2019, 05:32 PM	#19
Frank Castros VIP Member Join Date: Nov 2001 Location: The Lowcountry. Posts: 2,974 Likes: 2,586 Liked 2,725 Times in 961 Posts	Re: Aa/sa class dq at denver I've always said the single 4 barrel NASCAR HEMI in the classification guide is a farce. Bogus intake manifold and hood scoop. Have you ever seen a vintage photo of an actual NASCAR HEMI from 1964-65 with a hood scoop or a '66 HEMI Belvedere with a scoop, if so why didn't Jere Stahl have one? I'm MoPar through and through but give me a break.