SBC Stocker Ignition Wire Routing

Cdncarnut · 04-14-2016, 08:01 PM

I am replacing the ignition wires on my SBC Stocker.
The cam has the #4 & #7 cylinders swapped.
I was told to keep the #2 & #4 wires as far apart as possible and not cross them.

What are others doing for routing their ignitions wires.
It was suggested that I lay the #2 wire on top of the intake and run the 4, 6 & 8 wires along the other side of the valve cover.

As this is going to be my only second season with this car, it is obvious that I have a lot to learn.

04-14-2016, 08:01 PM	#1
Cdncarnut Member Join Date: Jul 2012 Posts: 213 Likes: 387 Liked 56 Times in 31 Posts	SBC Stocker Ignition Wire Routing I am replacing the ignition wires on my SBC Stocker. The cam has the #4 & #7 cylinders swapped. I was told to keep the #2 & #4 wires as far apart as possible and not cross them. What are others doing for routing their ignitions wires. It was suggested that I lay the #2 wire on top of the intake and run the 4, 6 & 8 wires along the other side of the valve cover. As this is going to be my only second season with this car, it is obvious that I have a lot to learn. __________________ Thomas NHRA 1959 D/SA

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode