cbs latest on handbrakes?

Ron Finney · 04-25-2011, 12:59 PM

Let me answer for Jeff. You would plumb one set to the front half of the cylinder and the second set to the back half of the cylinder. The dual master IS for safety that is why it is federally mandated on all US vehicles since the mid 1960's. If you have hydraulic failure, the pedal will drop some, but a rod inside the piston assembly will manually push the other pistion in the cylinder to apply the brakes on the other line. I guess I agree with Jeff, that the hand brake is more of a finish line enhancement than safety. If we are going to go the safety route, then that means every car needs a hand brake.

If you only have one set of rear calipers and no front brakes, then even a handbrake isn't going to help you, so where is the safety again?

04-25-2011, 12:59 PM	#28
Ron Finney Member Join Date: Jul 2008 Location: Greenwood, IN Posts: 168 Likes: 0 Liked 0 Times in 0 Posts	Re: cbs latest on handbrakes? Let me answer for Jeff. You would plumb one set to the front half of the cylinder and the second set to the back half of the cylinder. The dual master IS for safety that is why it is federally mandated on all US vehicles since the mid 1960's. If you have hydraulic failure, the pedal will drop some, but a rod inside the piston assembly will manually push the other pistion in the cylinder to apply the brakes on the other line. I guess I agree with Jeff, that the hand brake is more of a finish line enhancement than safety. If we are going to go the safety route, then that means every car needs a hand brake. If you only have one set of rear calipers and no front brakes, then even a handbrake isn't going to help you, so where is the safety again? __________________ Ron Finney 396V S/C