Ray Allen versus Jack Werst '1970 SS/EA Showdown'

Paul Ceasrine · 09-02-2011, 04:22 PM

K-Machine,

That Kwik-Way Model #FN portable boring bar was another good unit.
My father bought his new in 1971, for $1900.

Then later the Rotler.
If the block deck was square, that FN bar made a nice bore when using the low-speed, and of course a sharpened bit.
I still remember the hold down device, with the '3' thrumb screws,,,,,,
it loosened up on me a few times,,,,,,,

.

Kwik-Way,,,,made very good valve grinding equipment too,,,,,

Rich Biebel,,,,,,,,,,you guys must have bought your Kwik-Way equipment off of
Lacey Williams also,,,,,,,,
pc

09-02-2011, 04:22 PM	#11
Paul Ceasrine VIP Member Join Date: Apr 2009 Posts: 2,546 Likes: 0 Liked 10 Times in 10 Posts	Re: Ray Allen versus Jack Werst '1970 SS/EA Showdown' K-Machine, That Kwik-Way Model #FN portable boring bar was another good unit. My father bought his new in 1971, for $1900. Then later the Rotler. If the block deck was square, that FN bar made a nice bore when using the low-speed, and of course a sharpened bit. I still remember the hold down device, with the '3' thrumb screws,,,,,, it loosened up on me a few times,,,,,,,. Kwik-Way,,,,made very good valve grinding equipment too,,,,, Rich Biebel,,,,,,,,,,you guys must have bought your Kwik-Way equipment off of Lacey Williams also,,,,,,,, pc Last edited by Paul Ceasrine; 09-02-2011 at 04:24 PM.