Fuel Line

Lew Silverman · 04-28-2013, 08:34 PM

I've found the braided-line works best for me. The 1/2" aluminum that I used first was harder to bend properly, and difficult to secure to the chassis without deforming. Just my experience, but 20 minutes, two AN fittings and 6 insulated clamps drilled and screwed to the frame and I was done! And no pesky leaks either!

I also found a easy way to attach the fittings to the braided-hose. It's called a "Koul Tool", and it makes the job almost painless!

http://www.koultools.com/

Lew

04-28-2013, 08:34 PM	#2
Lew Silverman VIP Member Join Date: Mar 2010 Location: Newport News, VA Posts: 1,435 Likes: 371 Liked 129 Times in 59 Posts	Re: Fuel Line I've found the braided-line works best for me. The 1/2" aluminum that I used first was harder to bend properly, and difficult to secure to the chassis without deforming. Just my experience, but 20 minutes, two AN fittings and 6 insulated clamps drilled and screwed to the frame and I was done! And no pesky leaks either! I also found a easy way to attach the fittings to the braided-hose. It's called a "Koul Tool", and it makes the job almost painless! http://www.koultools.com/ Lew __________________ Lew Silverman #2070 "The Wagon Master" N/SA