302 ford intake advise

Rory McNeil · 11-01-2015, 05:55 PM

Have you considered a small stroker kit? I have a 331 cube SB Ford bracket engine I have ran in my 85 Mustang Stocker. Its a flat top piston pump gas deal, with a 570 lift solid flat tappet cam, out of the box AFR 185 heads, 650 Holley on a Victor Jr intake. With a Jerico 4 speed, 4.88 gears, 9x29 slicks, at 3050 pounds, it runs mid 10.s at 128 MPH (best of 10.29)shifting at 6800 RPM, hitting 7200 thru the traps. Dynoed at 485 HP, which is pushing it with a stock 5.0 block, after 5 years, we found several cracks in the main cap bolt holes, migrating down to the cam tunnel, so a new block in in order now, but it was together for 5 seasons.

11-01-2015, 05:55 PM	#6
Rory McNeil VIP Member Join Date: Jun 2007 Location: from Vancouver BC Canada, now in Nova Scotia Posts: 1,311 Likes: 317 Liked 1,106 Times in 303 Posts	Re: 302 ford intake advise Have you considered a small stroker kit? I have a 331 cube SB Ford bracket engine I have ran in my 85 Mustang Stocker. Its a flat top piston pump gas deal, with a 570 lift solid flat tappet cam, out of the box AFR 185 heads, 650 Holley on a Victor Jr intake. With a Jerico 4 speed, 4.88 gears, 9x29 slicks, at 3050 pounds, it runs mid 10.s at 128 MPH (best of 10.29)shifting at 6800 RPM, hitting 7200 thru the traps. Dynoed at 485 HP, which is pushing it with a stock 5.0 block, after 5 years, we found several cracks in the main cap bolt holes, migrating down to the cam tunnel, so a new block in in order now, but it was together for 5 seasons. __________________ NHRA 6390 STK M/S 85 Mustang