|
|
06-18-2016, 07:44 AM
|
#2 |
|
Junior Member
Join Date: Nov 2013
Posts: 91
Likes: 0
Liked 0 Times in 0 Posts
|
Re: M-200 torque converter installation
Bobby, I think you are not engaged with the pump drive yet. I measured a stock 200 with converter and mount pads are 1.125 inches behind the mounting surface. The pump drive, The two square notches on the neck of the converter are the last part to engage. Hope this helps. Louis Jeffery
|
|
|
|
|
Threaded Mode