Clutch ID

Maverick · 10-04-2019, 08:01 AM

It looks like six of the springs are adjustable on pressure, using a Allen wrench , flip it over and see if it has a aluminum drive plate with a steel insert, or a cast iron drive plate. And a Aluminum flywheel, with a steel insert, would take some energy away from the hit. Could be a good piece, also depends what type of clutch disc composition you are going to use. And it appears to be for high rpm shIfting since there is no counter weight

10-04-2019, 08:01 AM	#7
Maverick Member Join Date: Dec 2010 Posts: 299 Likes: 2 Liked 36 Times in 26 Posts	Re: Clutch ID It looks like six of the springs are adjustable on pressure, using a Allen wrench , flip it over and see if it has a aluminum drive plate with a steel insert, or a cast iron drive plate. And a Aluminum flywheel, with a steel insert, would take some energy away from the hit. Could be a good piece, also depends what type of clutch disc composition you are going to use. And it appears to be for high rpm shIfting since there is no counter weight Last edited by Maverick; 10-04-2019 at 08:09 AM.