Flat tapper lifter Stock Eliminator?

Alan Nyhus · 04-05-2021, 08:43 AM

R.J., on a cast cam, I've had excellent luck with the Trend tool steel lifters. They offer a reduced diameter pushrod cup oil hole option to control upstairs oil, if desired. They can also be recrowned and repolished several times for a very reasonable fee. Good products, great service and very timely delivery and turn around time.

Non coated on a cast cam (nitrided or not).

For a 8620 or steel billet cam, the PPPC brand DLC coated are great.

Hope this helps. -Al

04-05-2021, 08:43 AM	#4
Alan Nyhus VIP Member Join Date: Dec 2002 Location: Lower Dakota territory Posts: 1,180 Likes: 1,074 Liked 799 Times in 236 Posts	Re: Flat tapper lifter Stock Eliminator? R.J., on a cast cam, I've had excellent luck with the Trend tool steel lifters. They offer a reduced diameter pushrod cup oil hole option to control upstairs oil, if desired. They can also be recrowned and repolished several times for a very reasonable fee. Good products, great service and very timely delivery and turn around time. Non coated on a cast cam (nitrided or not). For a 8620 or steel billet cam, the PPPC brand DLC coated are great. Hope this helps. -Al __________________ "That'll never work....." Last edited by Alan Nyhus; 04-06-2021 at 08:04 AM.