Moser engineering axles, spool, hardware

Rory McNeil · 08-20-2021, 11:08 PM

When I started building my 85 Mustang Stocker, I went with a pair of Moser 31 spline axles, simply because I found a new pair in the local classifieds for $150., in the box. I added a Moser spool, C Clip eliminators, and a girdle cover. Also welded the tubes to the center casting. This was a 4 speed car, weighed 3090 for M, 3185 for N, ran the car in Stock for 10 years, then 3 years with a low 10 second bracket engine (still with the 4 speed), I broke a couple of ring and pinions, but never hurt the axles. Not as pretty as the Strange stuff in my other car, but the Mosers were great, especially for the price.

08-20-2021, 11:08 PM	#3
Rory McNeil VIP Member Join Date: Jun 2007 Location: from Vancouver BC Canada, now in Nova Scotia Posts: 1,311 Likes: 317 Liked 1,103 Times in 301 Posts	Re: Moser engineering axles, spool, hardware When I started building my 85 Mustang Stocker, I went with a pair of Moser 31 spline axles, simply because I found a new pair in the local classifieds for $150., in the box. I added a Moser spool, C Clip eliminators, and a girdle cover. Also welded the tubes to the center casting. This was a 4 speed car, weighed 3090 for M, 3185 for N, ran the car in Stock for 10 years, then 3 years with a low 10 second bracket engine (still with the 4 speed), I broke a couple of ring and pinions, but never hurt the axles. Not as pretty as the Strange stuff in my other car, but the Mosers were great, especially for the price. __________________ NHRA 6390 STK M/S 85 Mustang