|
|
![]() |
#1 | |
Member
Join Date: Oct 2006
Location: Tacoma, WA
Posts: 258
Likes: 0
Liked 0 Times in 0 Posts
|
![]() Quote:
If I understand correctly what you are saying is that with the up or down one class from your natural class would they be legal all the way down to 7.0#/hp or is it completely open ended once you get to AA? My experience is with lower class cars so this is an unknown to me. I thought there have been a few cars produced over the years that could not fit into stock due to their P/W ratio? If its down to 7.0 they would have to get hit with something around 38hp before they could not run stock not the 7 hp I previously stated.
__________________
Bill Edgeworth 6471 STK |
|
![]() |
![]() |
#2 |
Member
|
![]()
Bill, It would be Open-ended but you would get to the point of adding so much weight that it would create a problem being ridiculously heavy and issues of how the ballast would be legally added.
__________________
Dave Ley NHRA TECH |
![]() |
![]() |
#3 |
Member
|
![]()
Ed , I obviously don't have a dog in this race but I saw you asked Jack about an underated AMC. How about the 69 AMX 390/340 that just happens to be at 407 now ?
|
![]() |
![]() |
#4 | |
Veteran Member
Join Date: Nov 2001
Location: NOO JOISEY nexta NOO YAWK
Posts: 5,879
Likes: 38
Liked 100 Times in 45 Posts
|
![]() Quote:
now with the advances in technology seems very charitable(I bet Aris and Hemi would like to see that shaved off a bit).Thanx Dave.How's the recovery coming along? Ed
__________________
Former NHRA #1945 Former IHRA #1945 T/SA |
|
![]() |
![]() |
#5 | |
Member
Join Date: Oct 2006
Location: Tacoma, WA
Posts: 258
Likes: 0
Liked 0 Times in 0 Posts
|
![]() Quote:
It will be interesting to see what these cars weigh and what the AA index is in a few years. To Jack; I would agree with you. The guys who have these cars right now won’t be quite so enthusiastic when they have to pull an intake/blower and head off of one of those motors. It will definitely be an all-nighter in the teardown barn. Not very familiar with the Ford stuff but aren’t they DOHC or SOHC motors?
__________________
Bill Edgeworth 6471 STK |
|
![]() |
![]() |
#6 |
Member
|
![]()
Ed , How ironic that you are post # 401 !!! Can't get much more AMC than that !!! Anyway, I am doing very well and the recovery is well ahead of schedule. Thanks for asking.
Dave |
![]() |
![]() |
#7 |
VIP Member
Join Date: Jun 2002
Posts: 1,855
Likes: 83
Liked 444 Times in 145 Posts
|
![]()
Chad,
I'll send you a message. Jack, Unlike the prankster of many pages ago, this is information came from knowledgeable sources.
__________________
Bruce Noland 1788 STK |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|