Strange eng master cyl?

gmonde · 03-15-2009, 09:14 AM

you may have to get the adapter plate and relocate the push rod hold on the firewall ,the other thing that you will have to watch is the brake pedal geometery,if not correct you could have a break pedal thats way to hard or travels to much,close to the floor, just like any other componet on a race car there will be some trial and error before you get it right

on my car i ended up going with a 7/8 diameter master (i also have rear drums with wilwood front calipers

gmonde

03-15-2009, 09:14 AM	#3
gmonde Senior Member Join Date: Nov 2007 Posts: 615 Likes: 56 Liked 165 Times in 59 Posts	Re: Strange eng master cyl? you may have to get the adapter plate and relocate the push rod hold on the firewall ,the other thing that you will have to watch is the brake pedal geometery,if not correct you could have a break pedal thats way to hard or travels to much,close to the floor, just like any other componet on a race car there will be some trial and error before you get it right on my car i ended up going with a 7/8 diameter master (i also have rear drums with wilwood front calipers gmonde

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode