|
|
|
|
04-03-2009, 06:48 PM
|
#1 |
|
Member
Join Date: Oct 2002
Posts: 248
Likes: 0
Liked 0 Times in 0 Posts
|
Re: LS series, 6.0 iron block overbore allowance
I've never sonic checked a 6.0 block, but have seen a report on one that was done. Worst hole at stock 4.000" bore was .098" on non thrust, .295" on thrust side.
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
