|
|
|
|
05-24-2009, 01:20 PM
|
#1 | |
|
Member
Join Date: May 2002
Location: San Angelo Tx
Posts: 231
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Need Help 200 Metric Question
Quote:
I did not plug the governor passage,because the other unit did not have it plug ed.So I went out and plug ed it off,still no third.Put in a governor and a new governor cover,still no third.
__________________
Alan Warman STK 4107 |
|
|
|
|
05-24-2009, 02:05 PM
|
#2 |
|
Veteran Member
Join Date: Mar 2002
Location: Miles From Nowhere
Posts: 7,821
Likes: 2,910
Liked 5,133 Times in 1,957 Posts
|
Re: Need Help 200 Metric Question
Is it a reverse pattern then?
__________________
"We are lucky we don't get as much Government as we pay for." Will Rogers |
|
|
|
|
05-24-2009, 02:14 PM
|
#3 |
|
Member
Join Date: May 2002
Location: San Angelo Tx
Posts: 231
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Need Help 200 Metric Question
No Sir,I was told it was a forward patten valve body.Before I bought it I talked to Frank Lupo,and he said the early ones he made were all forward pattern.
__________________
Alan Warman STK 4107 |
|
|
|
|
05-24-2009, 02:23 PM
|
#4 | |
|
Veteran Member
Join Date: Mar 2002
Location: Miles From Nowhere
Posts: 7,821
Likes: 2,910
Liked 5,133 Times in 1,957 Posts
|
Re: Need Help 200 Metric Question
Quote:
Seems to me the governor passage would have to be plugged on the case side, above the valve body. Otherwise ,you're going to have to trace the fluid from the VB to the servo and direct. Call me : 602 -769-0346
__________________
"We are lucky we don't get as much Government as we pay for." Will Rogers |
|
|
|
|
|
05-27-2009, 06:07 PM
|
#5 |
|
Junior Member
Join Date: May 2009
Location: Québec Canada
Posts: 5
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Need Help 200 Metric Question
first time with you guys a got problem register my self to the forum. my advice is that you miss the check ball in the pump. Th 200 need that ball to have 3rd gear .
|
|
|
|
|
05-27-2009, 09:33 PM
|
#6 |
|
Member
Join Date: May 2002
Location: San Angelo Tx
Posts: 231
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Need Help 200 Metric Question
F/SA TSM
That is the first thing I checked,built enough of these in the eighties to remeber that.
__________________
Alan Warman STK 4107 |
|
|
|
|
05-27-2009, 09:49 PM
|
#7 |
|
Junior Member
Join Date: May 2009
Location: Québec Canada
Posts: 5
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Need Help 200 Metric Question
just in case sorry
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
