|
|
|
|
05-27-2009, 09:49 PM
|
#1 |
|
Junior Member
Join Date: May 2009
Location: Québec Canada
Posts: 5
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Need Help 200 Metric Question
just in case sorry
|
|
|
|
05-27-2009, 10:49 PM
|
#2 |
|
Member
Join Date: May 2002
Location: San Angelo Tx
Posts: 231
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Need Help 200 Metric Question
Don't be sorry,I am taking all advice on this problem.It looks like we traced the problem to the valve body.And welcome to Classracer.A lot of good people on here.
__________________
Alan Warman STK 4107 |
|
|
|
|
05-28-2009, 01:11 AM
|
#3 |
|
Veteran Member
Join Date: Mar 2002
Location: Miles From Nowhere
Posts: 7,821
Likes: 2,912
Liked 5,133 Times in 1,957 Posts
|
Re: Need Help 200 Metric Question
Alan ,it doesn't really matter if the check ball is there or not. If you're feeding both sides of the direct piston (center seal out and /or center ring on the pump removed) The reverse passage has to be blocked off someway. Either at the pump to case face or with the VB spacer plate feed blocked off. Have you checked that?
__________________
"We are lucky we don't get as much Government as we pay for." Will Rogers |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
