Need Intake for 426 Street Wedge

James L Miller · 12-10-2009, 11:24 PM

NHRA lists the 915 and 516 heads as legal for the street wedge in stock.

D = 2406516,2780915, 4532287 SS only

They don't list any intake casting numbers, but for the 383 they show some of the later 69-70 383 intakes as legal. Maybe you can use a 440 AVS intake and be legal? Didn't the early AFBs use a smaller bolt pattern? How would the early carb bolt up to a later intake? Maybe they allow for replacement AFBs like a 9626S or something? Sounds like an e-mail to your tech director may be in order.

GTX JOHN · 12-13-2009, 01:48 AM

I understand you can run the 915 heads if you use the 1.60 exhaust valve. These are way better than 516. To ID them in junkyard look on front machined area behind Alternator and if stamped HP they are 1.75 ..... if not stamped 1.60. If you can run 67-69 Intake for 440 (178) which I don't know.. It is also way better. I have several of each. Racer7411@yahoo.com

340Cuda · 12-13-2009, 01:31 PM

I have a friend that has some tall block single four barrel manifolds and some carbs.

Can you give me the casting numbers and carb numbers that will work for you?

Thanks,
Bill Lamb

John Lang · 12-13-2009, 05:28 PM

FED 387 ! I could use the 3611 carter, even if their are parts missing ! I have lots of parts ! Let me know what he wants for it !
Yes , I still live in Sheboygan ! .......Merry Christmas.......John Lang
I tried to send you a private message ,but could'nt because your box was full !!!

Mopar Steve · 12-13-2009, 08:12 PM

The 426W Single 4 intake pn is 2206000.

treessavoy · 12-13-2009, 09:00 PM

Quote:

Originally Posted by Mopar Steve

The 426W Single 4 intake pn is 2206000.

Is that the pn. or the casting no.?

JimR

moparman67 · 01-25-2010, 09:12 PM

i found the cirrect intake and carb via e-bay still need to find set of 916 cylinder heads. thanks all. jeff -d i,ll call you about heads. al

moparman67 · 01-25-2010, 10:01 PM

correction need a set of 915 heads

12-10-2009, 11:24 PM	#1
James L Miller Member Join Date: Apr 2005 Posts: 494 Likes: 6 Liked 25 Times in 16 Posts	Re: Need Intake for 426 Street Wedge NHRA lists the 915 and 516 heads as legal for the street wedge in stock. D = 2406516,2780915, 4532287 SS only They don't list any intake casting numbers, but for the 383 they show some of the later 69-70 383 intakes as legal. Maybe you can use a 440 AVS intake and be legal? Didn't the early AFBs use a smaller bolt pattern? How would the early carb bolt up to a later intake? Maybe they allow for replacement AFBs like a 9626S or something? Sounds like an e-mail to your tech director may be in order. __________________ Mopar 2 Ya!

12-13-2009, 01:48 AM	#2
GTX JOHN VIP Member Join Date: Jun 2009 Location: Boulder City, Nevada 89005 Posts: 2,736 Likes: 2,808 Liked 2,488 Times in 698 Posts	Re: Need Intake for 426 Street Wedge I understand you can run the 915 heads if you use the 1.60 exhaust valve. These are way better than 516. To ID them in junkyard look on front machined area behind Alternator and if stamped HP they are 1.75 ..... if not stamped 1.60. If you can run 67-69 Intake for 440 (178) which I don't know.. It is also way better. I have several of each. Racer7411@yahoo.com

12-13-2009, 01:31 PM	#3
340Cuda VIP Member Join Date: Apr 2003 Location: Tulsa, Oklahoma Posts: 1,675 Likes: 3,884 Liked 805 Times in 341 Posts	Re: Need Intake for 426 Street Wedge I have a friend that has some tall block single four barrel manifolds and some carbs. Can you give me the casting numbers and carb numbers that will work for you? Thanks, Bill Lamb

12-13-2009, 05:28 PM	#4
John Lang Member Join Date: Oct 2003 Location: Sheboygan Wi Posts: 391 Likes: 0 Liked 6 Times in 2 Posts	Re: Need Intake for 426 Street Wedge FED 387 ! I could use the 3611 carter, even if their are parts missing ! I have lots of parts ! Let me know what he wants for it ! Yes , I still live in Sheboygan ! .......Merry Christmas.......John Lang I tried to send you a private message ,but could'nt because your box was full !!! __________________ John Lang 365 STK, SS

12-13-2009, 08:12 PM	#5
Mopar Steve Junior Member Join Date: Mar 2008 Location: New Castle, PA Posts: 92 Likes: 0 Liked 1 Time in 1 Post	Re: Need Intake for 426 Street Wedge The 426W Single 4 intake pn is 2206000.

01-25-2010, 09:12 PM	#7
moparman67 Junior Member Join Date: Dec 2009 Posts: 11 Likes: 0 Liked 4 Times in 1 Post	Re: Need Intake for 426 Street Wedge i found the cirrect intake and carb via e-bay still need to find set of 916 cylinder heads. thanks all. jeff -d i,ll call you about heads. al

01-25-2010, 10:01 PM	#8
moparman67 Junior Member Join Date: Dec 2009 Posts: 11 Likes: 0 Liked 4 Times in 1 Post	Re: Need Intake for 426 Street Wedge correction need a set of 915 heads

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode