|
|
|
|
12-13-2009, 01:48 AM
|
#1 |
|
VIP Member
Join Date: Jun 2009
Location: Boulder City, Nevada 89005
Posts: 2,733
Likes: 2,803
Liked 2,486 Times in 697 Posts
|
Re: Need Intake for 426 Street Wedge
I understand you can run the 915 heads if you use the 1.60 exhaust valve. These are way better than 516. To ID them in junkyard look on front machined area behind Alternator and if stamped HP they are 1.75 ..... if not stamped 1.60. If you can run 67-69 Intake for 440 (178) which I don't know.. It is also way better. I have several of each. Racer7411@yahoo.com
|
|
|
|
12-13-2009, 01:31 PM
|
#2 |
|
VIP Member
Join Date: Apr 2003
Location: Tulsa, Oklahoma
Posts: 1,672
Likes: 3,866
Liked 802 Times in 339 Posts
|
Re: Need Intake for 426 Street Wedge
I have a friend that has some tall block single four barrel manifolds and some carbs.
Can you give me the casting numbers and carb numbers that will work for you? Thanks, Bill Lamb |
|
|
|
|
12-13-2009, 05:28 PM
|
#3 |
|
Member
Join Date: Oct 2003
Location: Sheboygan Wi
Posts: 391
Likes: 0
Liked 6 Times in 2 Posts
|
Re: Need Intake for 426 Street Wedge
FED 387 ! I could use the 3611 carter, even if their are parts missing ! I have lots of parts ! Let me know what he wants for it !
Yes , I still live in Sheboygan ! .......Merry Christmas.......John Lang I tried to send you a private message ,but could'nt because your box was full !!!
__________________
John Lang 365 STK, SS |
|
|
|
|
12-13-2009, 08:12 PM
|
#4 |
|
Junior Member
Join Date: Mar 2008
Location: New Castle, PA
Posts: 92
Likes: 0
Liked 1 Time in 1 Post
|
Re: Need Intake for 426 Street Wedge
The 426W Single 4 intake pn is 2206000.
|
|
|
|
|
12-13-2009, 09:00 PM
|
#5 | |
|
VIP Member
Join Date: Feb 2009
Location: Dunnellon,FL
Posts: 1,103
Likes: 0
Liked 4 Times in 4 Posts
|
Re: Need Intake for 426 Street Wedge
Quote:
Is that the pn. or the casting no.? JimR
__________________
Jim Rountree |
|
|
|
|
|
01-25-2010, 09:12 PM
|
#6 |
|
Junior Member
Join Date: Dec 2009
Posts: 11
Likes: 0
Liked 4 Times in 1 Post
|
Re: Need Intake for 426 Street Wedge
i found the cirrect intake and carb via e-bay still need to find set of 916 cylinder heads. thanks all. jeff -d i,ll call you about heads. al
|
|
|
|
|
01-25-2010, 10:01 PM
|
#7 |
|
Junior Member
Join Date: Dec 2009
Posts: 11
Likes: 0
Liked 4 Times in 1 Post
|
Re: Need Intake for 426 Street Wedge
correction need a set of 915 heads
|
|
|
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Hybrid Mode
