|
|
![]() |
#1 |
Member
Join Date: Jul 2002
Posts: 243
Likes: 36
Liked 34 Times in 12 Posts
|
![]()
Rusty, I mount the alum seats to the stock rails. This way they mount to the original floor holes and are adjustable. The stock rails are as light as any adjustable aftermarket rails and are free!
|
![]() |
![]() |
![]() |
#2 |
VIP Member
Join Date: Feb 2009
Location: Dunnellon,FL
Posts: 1,103
Likes: 0
Liked 4 Times in 4 Posts
|
![]()
I still use the stock bench seat in my '64 Ply Stocker but I want to raise the seat about 3" so that I have a better angle to push buttons and steer at the same time, not easy for an uncoordinated duffer.
Can I build my own seat brackets without running into legality problems? JimR
__________________
Jim Rountree |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|