HOME FORUM RULES CONTACT
     
   
   

Go Back   CLASS RACER FORUM > Class Racer Forums > Stock and Super Stock Tech

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 02-24-2010, 05:51 PM   #8
Mark Yacavone
Veteran Member
 
Mark Yacavone's Avatar
 
Join Date: Mar 2002
Location: Miles From Nowhere
Posts: 7,821
Likes: 2,912
Liked 5,133 Times in 1,957 Posts
Default Re: Help with U/SA

Quote:
Originally Posted by s10stocker View Post
I would def. go with the Metric with 5.38s and the 92.5 ro 30x9 radials. You can run those tires over 40psi. Will put you around 6500-6600 from 100-102 through the traps. Keep it cheap as possible and see where it lands. Maybe better than you thought. I was curious on the carb though. Can it be a dual jet or is it the computer carb.
It doesn't have to be a feedback carb. You just need a 1.21 venturi dual jet. Basically ,it's the front half of an 800 Q jet.
You guys DO know ,you're going to have to put a custom 12 bolt in that car, in order to be able to play with the gears?
I'd figure out a baseline on the ratio, and then ,when you go lower and don't pick up 60' but lose MPH, go back to where you were!
BTW, if you're not too deep into that car, I'd back right out of it ,and into a 78 Camaro 305 2 GC 2bbl car .
You could use the 8.5 rear that comes in them.
__________________
"We are lucky we don't get as much Government as we pay for." Will Rogers
Mark Yacavone is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:40 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.