|
|
![]() |
#1 |
VIP Member
Join Date: Dec 2008
Location: Richmond Hill GA (and Port Ludlow WA)
Posts: 4,305
Likes: 2,409
Liked 3,219 Times in 980 Posts
|
![]()
Amen Brother. I will pass a good pit space close to folks I know if I see one of those B&S things chugging along. I have one of the quiet portables with extra length shore line so I can strategically place it for fumes to go away from others. If others aren't as considerate simply pack up your stuff and move if possible, CO poisoning is nasty stuff.
__________________
Jim Carter 2340 Super Stock 2340 SST/2340 Stock Set another place at the table |
![]() |
![]() |
![]() |
#2 |
Member
Join Date: Oct 2006
Location: Otsego,Michigan
Posts: 101
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
Same story here,our CO detector in the toter was going off all the time and was told to replace it as Jeff said these do go bad.
I did find out that these detectors are date coded so be sure you are getting a fairly NEW built one !!! Doug Wesler S/C 3703 S/G 3703 |
![]() |
![]() |
![]() |
#3 |
Member
Join Date: Dec 2006
Posts: 171
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
Most CO detectors sound off in codes that can be found in the directions. Keep in mind that any fuel fired appliances produce CO, stoves, refrigerators, heaters etc. The activation source may be coming from within your unit and the only way to be sure is to have someone take readings. If that is not available, the only safe thing to do is completely ventilate the unit and shut off all appliances until they can be tested.
|
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|