|
|
|
|
08-06-2013, 04:25 PM
|
#1 |
|
VIP Member
Join Date: Jan 2003
Location: Allentown,PA
Posts: 2,477
Likes: 891
Liked 882 Times in 236 Posts
|
Re: 4 wheel disc brakes
Your T-bird master cyl is 21mm or about 13/16".
It will work with 2 piston calipers, but would probably be undersized for a 4 piston front caliper. It also will work better with a low pedal , ratio like 4-1. If you're using the stock pedal and it had power brakes ,thats about what most of them are. Getting good brakes is all about balancing pressure with the correct volume ,while getting a comfortable feel for the pedal pressure required.
__________________
Tom Goldman 1500 SG , 1506 STK |
|
|
|
08-06-2013, 07:42 PM
|
#2 |
|
Live Reporter
Join Date: Sep 2005
Location: Golden Beach Maryland
Posts: 1,234
Likes: 55
Liked 262 Times in 124 Posts
|
Re: 4 wheel disc brakes
Tom thanks for the reply, Do you think it will stop ok with the 1" MC. I'm sure its a manual brake set up on the car from the factor.
|
|
|
|
|
08-06-2013, 10:51 PM
|
#3 |
|
VIP Member
Join Date: Jan 2003
Location: Allentown,PA
Posts: 2,477
Likes: 891
Liked 882 Times in 236 Posts
|
Re: 4 wheel disc brakes
Robbie, it should stop ok as long as you don't run out of pedal travel .
__________________
Tom Goldman 1500 SG , 1506 STK |
|
|
|
|
08-07-2013, 06:50 AM
|
#4 |
|
Live Reporter
Join Date: Sep 2005
Location: Golden Beach Maryland
Posts: 1,234
Likes: 55
Liked 262 Times in 124 Posts
|
Re: 4 wheel disc brakes
Thanks Tom, see you at Cecil.
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
