|
|
08-18-2015, 12:28 AM
|
#1 |
|
Junior Member
Join Date: Jan 2011
Posts: 87
Likes: 3
Liked 58 Times in 23 Posts
|
Q jet base gaskets
we have a J/SA ,255hp 69 Chevelle wagon, Does anyone have the part number of the 1/4 inch base gaskets for a Quadura jet ? Thanks
|
|
|
|
08-18-2015, 02:27 AM
|
#2 |
|
Member
Join Date: Dec 2004
Posts: 215
Likes: 16
Liked 79 Times in 22 Posts
|
Re: Q jet base gaskets
Fel Pro 17845 is one option.
|
|
|
|
|
08-18-2015, 07:56 AM
|
#3 |
|
Member
Join Date: Jul 2007
Posts: 173
Likes: 39
Liked 28 Times in 9 Posts
|
Re: Q jet base gaskets
Jegs/Summit has most of the Fel Pro numbers ; I use #1908 .
|
|
|
|
|
08-18-2015, 09:22 AM
|
#4 |
|
Member
Join Date: Jan 2009
Location: Carleton Place, On. Canada
Posts: 107
Likes: 5
Liked 0 Times in 0 Posts
|
Re: Q jet base gaskets
Also look up Chryco Q'jet base gaskets.
__________________
old 1608 stock racer |
|
|
|
|
08-18-2015, 09:43 AM
|
#5 |
|
Member
Join Date: Feb 2002
Location: Kearney Mo
Posts: 197
Likes: 425
Liked 195 Times in 30 Posts
|
Re: Q jet base gaskets
I have always been under the impression that rule book called out "maximum two 1/4" carb base gaskets"? I was told by reputable long time stock racer that its just two gaskets with no specific thickness! Not sure it make any big difference but dose anyone have clarity?
Jim |
|
|
|
|
08-18-2015, 11:28 AM
|
#6 |
|
Junior Member
Join Date: Jul 2012
Posts: 1
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Q jet base gaskets
i use a couple fel pro 60335 gaskets
|
|
|
|
|
08-18-2015, 12:04 PM
|
#7 | |
|
VIP Member
Join Date: Oct 2002
Location: On a hilltop in Pa.
Posts: 4,486
Likes: 3,587
Liked 7,683 Times in 1,731 Posts
|
Re: Q jet base gaskets
Quote:
__________________
Billy Nees 1188 STK, SS I'm not spending 100K to win 2K |
|
|
|
|
|
08-18-2015, 12:40 PM
|
#8 |
|
Senior Member
Join Date: Jul 2003
Posts: 890
Likes: 679
Liked 1,019 Times in 367 Posts
|
Re: Q jet base gaskets
Bought theses off Mike Keown many years ago. They are 1/4 inch thick
__________________
Jeff Niceswanger 3740 SS Last edited by Jeff Niceswanger; 08-18-2015 at 02:39 PM. |
|
|
|
|
08-18-2015, 03:05 PM
|
#9 |
|
Junior Member
Join Date: Jan 2011
Posts: 87
Likes: 3
Liked 58 Times in 23 Posts
|
Re: Q jet base gaskets
Jeff, I think that open style gasket is OK for a open plenum intake manifold,, but on a stocker cast manifold, it should be a 4 hole , shouldn't ?
|
|
|
|
|
08-18-2015, 03:13 PM
|
#10 |
|
Senior Member
Join Date: Jul 2007
Location: East China, MI
Posts: 504
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Q jet base gaskets
For what its worth, several years ago we tested with the open gasket vs. the 4 hole gasket on the dyno and the 4 hole gasket made slightly more power and torque with our combination.
__________________
Nelson Kowal Stock 345 |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
