Alternator for Stocker w/ EFI

[Dave Muller]

Originally Posted by SSGT Mustang

Can you share the link here when you get a chance.

By the way: Noticed you qualified number 2 last weekend at over a second under. Fast car.

I'd be very interested in getting that link also.

[west coast]

Here is the link this is the alt that I use. I took to a local alt shop and the put a 1 wire regulator in it for me for $25 DB may have them I am not sure can call and ask. This is small and light 30 amps. I change my pulley over to a serpentine belt. Have been using this for a couple of years now with out any problems on an efi car. let me know if anybody has anything better?
http://www.dbelectrical.com/p-4720-k...231-64012.aspx

[Rob Petrie E395]

Any chance you would tell me where you found a serpentine pulley that will fit it. I have been wanting to do the same thing.
Thanks

[Bobby Fazio]

Originally Posted by Rob Petrie E395

Any chance you would tell me where you found a serpentine pulley that will fit it. I have been wanting to do the same thing.
Thanks

Isn't a V-belt better for racing?

[west coast]

Have to google it later today on the crank pulley they are about $50. The alt pulley I got of ebay years ago from a nascar team then had to make a bushing to fit my alt, if I remember right paid $25 for 5 of them still have some stashed away some where. The pulleys did have the same number of ribs but just use the less number for the belt.

[George Wright]

Originally Posted by Rob Petrie E395

Any chance you would tell me where you found a serpentine pulley that will fit itwww.krcpower.com

I have been wanting to do the same thing.
Thanks

KCR Power Steering makes serpentine pulleys that will replace the v belt pulleyd on a Denso mini alternator. www.kcrpower.com. I use one on my super stock Probe.

[west coast]

UPR is where I got my small crank pulley. I see they also have alt pulley also don't know if it would fit on a small alt, but like every other part I buy have to modify it. Headed to KRC to see what they have now.

[Rob Petrie E395]

Originally Posted by George Wright

KCR Power Steering makes serpentine pulleys that will replace the v belt pulleyd on a Denso mini alternator. www.kcrpower.com. I use one on my super stock Probe.

Thank You! Exactly what I needed.