Stocker replacement rods

Coleydog · 11-29-2016, 02:37 PM

My question, can we use a floating pin if the engine came with pressed pins? I'm thinking no but... I have a new set of Eagles and was hoping I could use them.

Rsmith38 · 11-29-2016, 03:03 PM

Yes you can use floating pins. Bigger question - are the rods on the approved list?

Coleydog · 11-29-2016, 04:16 PM

Quote:

Originally Posted by Rsmith38

Yes you can use floating pins. Bigger question - are the rods on the approved list?

Thanks for info
I purchased them with a maybe, dude said they where Eagles, h-beam, no markings that I've seen, but not used at least. The pistons I have are correct but no clip groves, are they allowed to be cut? If this gets to much I'll use the stock ly rods. I see no reason they won't last at 5500 tp 6000 rpm.

pmrphil · 11-29-2016, 07:14 PM

Careful, Eagle rods are all marked. Lots of Chinese crap copies out there.

GTX JOHN · 11-30-2016, 02:52 PM

We run LY rods with good bolts to 6800 regularly and have for 40 years. They are a lot better than some of the Junk out there! We do prefer Eagle and Manley stuff in higher budget builds.

Coleydog · 12-01-2016, 01:29 AM

Quote:

Originally Posted by GTX JOHN

We run LY rods with good bolts to 6800 regularly and have for 40 years. They are a lot better than some of the Junk out there! We do prefer Eagle and Manley stuff in higher budget builds.

Did you sell the 74-440?

GTX JOHN · 12-09-2016, 03:18 AM

Nope......Still on pallet and ready to race for .30 cents on Dollar!

Eric Merryfield · 12-09-2016, 11:08 AM

Quote:

Originally Posted by GTX JOHN

We run LY rods with good bolts to 6800 regularly and have for 40 years. They are a lot better than some of the Junk out there! We do prefer Eagle and Manley stuff in higher budget builds.

John what is a LY rod? Special flavor of factory rod? Thanks Eric

FireSale · 12-09-2016, 01:03 PM

Quote:

Originally Posted by Coleydog

Did you sell the 74-440?

If that's a 440 wedge, here is the only Eagle rod listed for it in the NHRA parts guide.

EAGLE
B.E. 2.500 S.E. 1.094 Length 6.760 Wgt 875
CRS6760C3D
413/426/440 Mopar

I run an Eagle crank. If it isn't stamped with their logo and part number, it's not an Eagle.

Coleydog · 12-09-2016, 06:11 PM

Quote:

Originally Posted by GTX JOHN

Nope......Still on pallet and ready to race for .30 cents on Dollar!

Can you pm me some particulars? Mike

11-29-2016, 02:37 PM	#1
Coleydog Senior Member Join Date: Jul 2014 Posts: 569 Likes: 36 Liked 53 Times in 38 Posts	Stocker replacement rods My question, can we use a floating pin if the engine came with pressed pins? I'm thinking no but... I have a new set of Eagles and was hoping I could use them.

11-29-2016, 03:03 PM	#2
Rsmith38 Member Join Date: Mar 2011 Posts: 186 Likes: 0 Liked 28 Times in 15 Posts	Re: Stocker replacement rods Yes you can use floating pins. Bigger question - are the rods on the approved list?

11-29-2016, 07:14 PM	#4
pmrphil Member Join Date: Aug 2010 Location: CT Posts: 457 Likes: 1,797 Liked 347 Times in 151 Posts	Re: Stocker replacement rods Careful, Eagle rods are all marked. Lots of Chinese crap copies out there. __________________ Phil Molski PMR Performance S/C 1623

11-30-2016, 02:52 PM	#5
GTX JOHN VIP Member Join Date: Jun 2009 Location: Boulder City, Nevada 89005 Posts: 2,732 Likes: 2,798 Liked 2,479 Times in 697 Posts	Re: Stocker replacement rods We run LY rods with good bolts to 6800 regularly and have for 40 years. They are a lot better than some of the Junk out there! We do prefer Eagle and Manley stuff in higher budget builds. __________________ John Irving 741 Stock 741 Super Stock

12-09-2016, 03:18 AM	#7
GTX JOHN VIP Member Join Date: Jun 2009 Location: Boulder City, Nevada 89005 Posts: 2,732 Likes: 2,798 Liked 2,479 Times in 697 Posts	Re: Stocker replacement rods Nope......Still on pallet and ready to race for .30 cents on Dollar! __________________ John Irving 741 Stock 741 Super Stock

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode