|
|
|
|
09-20-2021, 10:34 PM
|
#1 |
|
Member
Join Date: Mar 2012
Posts: 258
Likes: 3
Liked 90 Times in 52 Posts
|
Re: Dual Point Corvette Distributor
fyi .. the Holley website shows their Accel ignition division shows a heavy duty / strong spring pressure points / condenser / clamp part # available for gm distributors
|
|
|
| Liked |
|
09-21-2021, 06:21 AM
|
#2 |
|
VIP Member
Join Date: Dec 2001
Location: Texarkana Ark/TX
Posts: 2,446
Likes: 575
Liked 880 Times in 311 Posts
|
Re: Dual Point Corvette Distributor
If my memory is doing right I think the best set back in the day were made by Mallory.
Think they had an X in the part number. for extra spring tension. Sure beat doing the double spring modification.
__________________
Adger Smith (Former SS) Last edited by Adger Smith; 09-21-2021 at 06:24 AM. Reason: add |
|
|
|
| Liked |
|
09-21-2021, 10:10 AM
|
#3 | |
|
Member
Join Date: Oct 2020
Posts: 269
Likes: 3,723
Liked 520 Times in 176 Posts
|
Re: Dual Point Corvette Distributor
Quote:
I believe the Good Accel points were #110129 and the regular Street points were #110128. The Mallory points were #102X - these were the Heavy Duty race points they would go 10,000 RPM on my old Sunnen Distributor machine. I used the old Accel #110129 points till I couldn't get them anymore, are they still available under a different part? Thanks in advance. Respectfully, Henry Kunz 1534 H/SA |
|
|
|
|
| Liked |
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
