Wilwood Brake Corvette Front

[waltz]

Originally Posted by dragracerray

Walt,
Do you have the part number of the kit or a picture of the brakes assembled from the instructions? It would help us help you. I see what you mean 11/16-16 bolts are almost impossible to find online. Ray

Wilwood 140-12040 Brake kit for 69-82 Corvette Front. #6 on the blow-up pic. McMaster-Carr has bolts that are close (hex-head 3/4-16), but would need to drill and thread the hole. A bit much for a 'Bolt-in' kit!

[dragracerray]

Walt does the threaded hole for #6 go all the way through the spindle? If it does I think I would go down to a 5/8" bolt with a nut on the backside of the spindle
If the thread does not go all the way thru you may need a 3/4" "bottoming tap" to get enough threads in that short a distance. Ray

[waltz]

Originally Posted by dragracerray

Walt does the threaded hole for #6 go all the way through the spindle? If it does I think I would go down to a 5/8" bolt with a nut on the backside of the spindle
If the thread does not go all the way thru you may need a 3/4" "bottoming tap" to get enough threads in that short a distance. Ray

Its a 'blind' hole. I haven't measured the hole, but looks like it is about 3/4in deep. As I might have mentioned, I'm talking to Wilwood to get a longer bolt. They have bolt 'kits' and one for the 63-64 Corvette (drum brakes) seems to have a longer bolt, just looking at the pics. That kit is about $95.00, so I'd like to be sure before pulling the trigger on that!! 3 threads is pretty sketchy even if I got it to tighten up! Monday may bring some relief.

[tscheerer]

Walt, do you want to sell the OEM front disc brakes off the 74 Corvette?

[ken robinson]

Are bolts 2 and 5 in the blue print look like there long ? Would they work if they shipped you a Qty of 2 ? ... I see they are differant after looking closer , top bolts are 11/16-16 & really hard to find hope they can help you they just overlooked that detail .