Transmission Shields

[e vassar]

We have the Ken Kier on a metric 200 Probably the best one out there.

[DCox]

Ken Keir has a very nice one

[SSDiv6]

The Tom Waters Race Car Products Shield sold by Scott McClay and others, fits nice and has no issues on a SS/GT Cobalt.

[Chipper Chapman]

Originally Posted by SSDiv6

The Tom Waters Race Car Products Shield sold by Scott McClay and others, fits nice and has no issues on a SS/GT Cobalt.

Sure is tight in stock floor A body, like massaging required tight. Your results may vary.

[fordteacherguy]

Originally Posted by SSDiv6

The Tom Waters Race Car Products Shield sold by Scott McClay and others, fits nice and has no issues on a SS/GT Cobalt.

FYI:

Ordered a Tom Waters C-4 shield through Competition Products a week or so ago. i was contacted by CP's purchasing manager who said he is out of business and they were pulling his products listings from their website and refunded my money.

[SSDiv6]

Originally Posted by fordteacherguy

FYI:

Ordered a Tom Waters C-4 shield through Competition Products a week or so ago. i was contacted by CP's purchasing manager who said he is out of business and they were pulling his products listings from their website and refunded my money.

Brian,
Summit Racing carries the TCI brand C-4 shield, both in Red and Blue color.

[Jim Caughlin]

Originally Posted by SSDiv6

Brian,
Summit Racing carries the TCI brand C-4 shield, both in Red and Blue color.

And they will not even remotely fit under the stock floorpan, don't even try.

[Frank Bialas]

Originally Posted by Jim Caughlin

And they will not even remotely fit under the stock floorpan, don't even try.

They didn't fit 40 years ago, unless they changed design, good luck!!! Do what most of use are doing, snap a blanket to inner tunnel so not to suffocate-overheat trans and strap lightly not to bind up linkage, also careful around a vent if relocated and especially headers not to start a fire if some fluid escapes, or cut out tunnel.