Mopar perch on housing

pmrphil · 02-01-2023, 10:29 AM

Weld on the opposite side of the tube and it will pull it back. Ugly, but it works. Or, get somebody with a jig to put new ends on it after you weld the perches on.

Coleydog · 02-01-2023, 11:18 AM

All good advice so far, racers know their stuff.

Coleydog · 02-01-2023, 11:26 AM

Quote:

Originally Posted by pmrphil

Weld on the opposite side of the tube and it will pull it back. Ugly, but it works. Or, get somebody with a jig to put new ends on it after you weld the perches on.

I made all my jigs to do that, I’ll tig a little, check, weld, check with the set up jig in place.

02-01-2023, 10:29 AM	#1
pmrphil Member Join Date: Aug 2010 Location: CT Posts: 460 Likes: 1,810 Liked 348 Times in 152 Posts	Re: Mopar perch on housing Weld on the opposite side of the tube and it will pull it back. Ugly, but it works. Or, get somebody with a jig to put new ends on it after you weld the perches on. __________________ Phil Molski PMR Performance S/C 1623

02-01-2023, 11:18 AM	#2
Coleydog Senior Member Join Date: Jul 2014 Posts: 572 Likes: 39 Liked 53 Times in 38 Posts	Re: Mopar perch on housing All good advice so far, racers know their stuff.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode