Anyone with a Class A MH on Workhorse Chassis

Joe Martens · 11-02-2017, 07:55 PM

I have a 2002 Class A Motorhome on a Workhorse P-32 Chassis. While on my way back from Rockingham last Sunday, the motorhome shut off as if someone turned the key off. Luckily I was able to coast off of the freeway and into a safe area.

It turned out to be the ignition switch which was fried due to being overloaded. After reading up on it, it is a common problem with this chassis, in which they sell a kit with a relay and wiring harness to take the load off the switch.

Anyone with this type of motorhome may want to look into this to avoid headaches down the road. Here is a link to the kit information.

http://www.oemys-performance.com/med...on%20relay.pdf.

11-02-2017, 07:55 PM	#1
Joe Martens Senior Member Join Date: Dec 2001 Location: North Olmsted, Ohio Posts: 787 Likes: 627 Liked 196 Times in 69 Posts	Anyone with a Class A MH on Workhorse Chassis I have a 2002 Class A Motorhome on a Workhorse P-32 Chassis. While on my way back from Rockingham last Sunday, the motorhome shut off as if someone turned the key off. Luckily I was able to coast off of the freeway and into a safe area. It turned out to be the ignition switch which was fried due to being overloaded. After reading up on it, it is a common problem with this chassis, in which they sell a kit with a relay and wiring harness to take the load off the switch. Anyone with this type of motorhome may want to look into this to avoid headaches down the road. Here is a link to the kit information. http://www.oemys-performance.com/med...on%20relay.pdf. __________________ Joe Martens AA/Stock 3969

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode