30" tires on a FOX?

west coast · 03-03-2009, 03:10 PM

In front of the tire I remove as much as I could about an 1 1/2" at the bottom cut off excess than folded it at 90° back to the inner wheel well and welded. Did this about 9" up tapering to the stock radius of the wheel well at about the trim line. Did alot of cut out of material an hammering in some. Basicly did the same on the back side of the opening also. I think I have some picture of this if not I can take some this weekend. I have not been able to post pictures here but PM me and I can send some.

03-03-2009, 03:10 PM	#1
west coast Senior Member Join Date: Dec 2008 Location: Rainy Washington Posts: 610 Likes: 12 Liked 227 Times in 74 Posts	Re: 30" tires on a FOX? In front of the tire I remove as much as I could about an 1 1/2" at the bottom cut off excess than folded it at 90° back to the inner wheel well and welded. Did this about 9" up tapering to the stock radius of the wheel well at about the trim line. Did alot of cut out of material an hammering in some. Basicly did the same on the back side of the opening also. I think I have some picture of this if not I can take some this weekend. I have not been able to post pictures here but PM me and I can send some.