Dana 60 w/magnetic collar

Tom Goldman · 03-04-2009, 10:19 PM

Ed,I used a stock type Spicer 1350 yoke. ....By spacing the yoke away from the seal by about .250" ,you can get enough clearance for a standard width ring....I used a M-W ring for a 28 spline 9" yoke and bored the id. to Dana dia. ,which I think was 2.885" .....I did mine about 10 Years ago cause nobody had a trick yoke back then. ..it's still in the car .. Even moving the yoke out by .250" there is still plenty of engagement on the pinion splines. ......Tom

03-04-2009, 10:19 PM	#6
Tom Goldman VIP Member Join Date: Jan 2003 Location: Allentown,PA Posts: 2,477 Likes: 893 Liked 883 Times in 237 Posts	Re: Dana 60 w/magnetic collar Ed,I used a stock type Spicer 1350 yoke. ....By spacing the yoke away from the seal by about .250" ,you can get enough clearance for a standard width ring....I used a M-W ring for a 28 spline 9" yoke and bored the id. to Dana dia. ,which I think was 2.885" .....I did mine about 10 Years ago cause nobody had a trick yoke back then. ..it's still in the car .. Even moving the yoke out by .250" there is still plenty of engagement on the pinion splines. ......Tom __________________ Tom Goldman 1500 SG , 1506 STK