|
|
|
|
03-05-2009, 10:42 PM
|
#1 |
|
VIP Member
Join Date: Jan 2003
Location: Allentown,PA
Posts: 2,477
Likes: 892
Liked 883 Times in 237 Posts
|
Re: Dana 60 w/magnetic collar
Sounds like they mayhave some different diminsions than some of the older yokes. ....the Spicer one I have on the old car measured 3'' long ,and the new yokes they offer are shown at 3.500". ....You'll know right away if the collar is against the seal. ....Tom
__________________
Tom Goldman 1500 SG , 1506 STK |
|
|
|
03-06-2009, 08:52 PM
|
#2 |
|
Member
Join Date: Jun 2007
Location: NJ
Posts: 351
Likes: 62
Liked 126 Times in 61 Posts
|
Re: Dana 60 w/magnetic collar
On my dana I turned the ID of the collar with the magnets so I could clamp it to the dust shield on the spicer yoke. I may have put some bearing locktite on it too. Hasn't moved in three years.
|
|
|
|
|
03-06-2009, 10:13 PM
|
#3 |
|
Member
Join Date: Dec 2007
Location: Everson, WA.
Posts: 122
Likes: 1
Liked 0 Times in 0 Posts
|
Re: Dana 60 w/magnetic collar
A friend of mine had the standard yoke on his Dana, but he wanted to install a ring without spending the money on a new yoke, so we just chucked it up in the lathe and cut a recess in the yoke to install the ring. It looks just like the yoke's that were made for the ring when your done and it's holding up fine in his manual stocker. Shawn
__________________
Shawn Blair 6383 SS 634 STK |
|
|
|
 |
|
|
Hybrid Mode
