|
|
![]() |
#1 |
Junior Member
Join Date: Jan 2009
Location: Liberty Lake, WA, Peoria,AZ
Posts: 80
Likes: 195
Liked 6 Times in 6 Posts
|
![]()
There's a guy by the name of Butch Ball that has one here in Yakima, WA. I've been trying to get a gander at it for years. It was sold through Yakima Dodge.
Dennis Lester's step father Harry Smythe, owner of Yakima Dodge, at the time of the D dart intro. drove one as a "demo". --Contact Dennis at his car lot -- he might be able to "hook you up" historically speaking -- Butch Ball et. al. butchered a wagon for D/MP but I don't know about a D dart-- Butch was last seen blowing up a Turbo Pinto and getting "hosed" by NHRA factoring.. |
![]() |
![]() |
![]() |
#2 |
VIP Member
Join Date: Feb 2002
Location: Conway, AR
Posts: 1,739
Likes: 0
Liked 6 Times in 4 Posts
|
![]()
'Scuse the hijack, but I saw that "Butch Ball" Pinto run at a points race in Marion South Dakota and it was virtually as fast as Buddy Ingersoll's car; 9.80s @ 134 mph, pulling the wheels on every shift of the Doug Nash 5-speed. I THINK Butch had the NHRA AA/MC record at that time. Impressive car...
Too bad NHRA killed those cars; they were among the most exciting and fun to watch I've seen in my 54 years of watching drag cars do their thing! If I were ever going to build a "nostalgia" car, that would be my choice... Bill
__________________
Bill Last edited by bill dedman; 03-20-2009 at 12:51 AM. |
![]() |
![]() |
![]() |
#3 |
Junior Member
Join Date: Apr 2007
Location: Port St. Lucie, Florida
Posts: 57
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
Bill,
I know that Paul Canizzaro wrote that there were about 25 D/Darts built. This is what I've dug up on the car so far. When my first one was registered with Galen back in 2000, it was one - of - six in his registry. He sent me a list of the VIN's and S/O numbers that were registered. The last number he had listed had a VIN ending in 937. In 2002 I bought "The Politician" from Al Adam. It had a VIN number ending in 888. So, 888-937 would be a 50 car build. The 417 in the S/O number indicates that the cars were built on Sunday, April 17th. Since 1998, I have collected VIN and S/O numbers from 5 other D/Darts. All the VIN's and S/O's fall between the 888 and 937 cars. The number that I didn't include in my previous post was the Porach Dodge. The original owner had the paperwork from the car when he bought and raced it. The car is long gone now. So I have 10 VIN's of cars that currently exist. I'm not sure if they were race cars or not. D/Dart Race Cars of that time were: The Politician (*) The Bounty Hunter The Coronet Dodge The Suburban Dodge Boys The Baby Goat The Little Ram Charger The Mount Vernon Dodge The Porach Dodge (*) The Newcomer The Sam Brown Dodge The "Big Bad Dodge" Jr The Yakima Dodge Plus -- A D/Dart owned by John Bedell - Pictures on the D/Dart website. (*) -- Have the VIN numbers of these 2 race cars. That's a total of 22 cars.................please feel free to add to the list of race cars. Please include stuff like car names, driver names, tracks raced at with - city and or state. ----- thanks in advance. dart4forte, Been following the build of your 64 Dart on FABO. Nice looking car. Still have the PM from that site on the D/Dart. Any help with the numbers would be appreciated. Alan |
![]() |
![]() |
![]() |
#4 | |
VIP Member
Join Date: Nov 2001
Location: Florida
Posts: 1,542
Likes: 34
Liked 138 Times in 51 Posts
|
![]() Quote:
__________________
LOCOMOTION Racing |
|
![]() |
![]() |
![]() |
#5 |
VIP Member
Join Date: Feb 2002
Location: Conway, AR
Posts: 1,739
Likes: 0
Liked 6 Times in 4 Posts
|
![]()
Myron,
Your point is well taken, but if they had a run of 50 IDENTICAL cars, (like a "fleet" order) wouldn't it just make sense to assemble them all at one time, since they had to bring that specific accessory/equipment package to the assembly line, anyway. I'm not disputing what you say, it just makes me wonder why they'd choose to split up an order for 50 cars that were exactly alike in terms of equipment. I'm just asking... Bill
__________________
Bill |
![]() |
![]() |
![]() |
#6 |
VIP Member
Join Date: Feb 2002
Location: Conway, AR
Posts: 1,739
Likes: 0
Liked 6 Times in 4 Posts
|
![]()
Alan,
Good luck with this quest! I'd love to see it happen, but if they don't come off this 275 HP figure and assign a realistic (250?) factor to these cars, it will all have been for nothing... My 2-cents. Bill
__________________
Bill |
![]() |
![]() |
![]() |
#7 |
VIP Member
Join Date: Nov 2001
Location: Florida
Posts: 1,542
Likes: 34
Liked 138 Times in 51 Posts
|
![]()
Bill, it does make sense to grab 50 in a row. But that could be an exception instead of a rule. I just don't know enough about the proceedures and hoped it would give people who do know more something to consider.
I'm pretty sure specialty cars like Challenger T/A's, Dodge Charger Daytona's, etc. were not sequential. But it would be interesting to find out how smaller runs of other special cars were done. (i.e.: '68 Hemi Cudas and Darts (they had VINs, didn't they?), the 383 Darts that Mr. Norm got and converted to 440s, aluminum-nosed cars from '64, etc.)
__________________
LOCOMOTION Racing |
![]() |
![]() |
![]() |
#8 | |
Junior Member
Join Date: Oct 2006
Location: Yakganistan
Posts: 80
Likes: 0
Liked 1 Time in 1 Post
|
![]() Quote:
As far as the 64, It's coming along, still alot to do. I'll probly fire the motor when i get back from SpringFling. If I get to look at Butvh Balls car i'll try to get some numbers. |
|
![]() |
![]() |
![]() |
#9 |
VIP Member
Join Date: Feb 2002
Location: Conway, AR
Posts: 1,739
Likes: 0
Liked 6 Times in 4 Posts
|
![]()
I just learned that the aluminum Edelbrock/Mopar- Performance aluminum intake manifold has been accepted by NHRA for use on the 235 HP "Commando" motor in Stock Eliminator.
That should make a positive change in the breathing, I would think. Bill
__________________
Bill |
![]() |
![]() |
![]() |
#10 |
Junior Member
Join Date: Oct 2006
Location: Yakganistan
Posts: 80
Likes: 0
Liked 1 Time in 1 Post
|
![]()
Looks like my stock in D4B manifolds has gone up
|
![]() |
![]() |
![]() |
|
|