290 amc stocker pistons? - Page 2

gmonde · 04-05-2009, 06:48 PM

JE and DIAMOND are paying ,had JE send my pistons with out the part number etched in them ,had to send them back double check what you get gmonde

greg fulk · 04-05-2009, 11:21 PM

Diamond is off the hook! totaly great looking pice if ya have the money!

Tom Goldman · 04-06-2009, 04:36 PM

Quote:

Originally Posted by Jeff Lee

I've had them made by JE, CP and now I just had a set made by Diamond. Of all the pistons I've had made, Diamond by far was best. I, or my machine shop, has had issues with both J&E & CP. I'm talking expediancy, cost, problems in not following instructions, all this goes into my opinion of how I was handled as a customer. I'm not slamming them because these wern't "end of the world" problems, but so far Damond is the only one that gets a "Diamond" rating from me.
I've also heard good word lately about Weisco.
I've always had the manufacturer send the piston in for approval as opposed to what Tom Goldman did. Not sure if that helps from loosing parts or not.
I believe NHRA.com has a contingency sponsor list on-line.

Jeff, BRC sent the pistons to NHRA, not me. They were signed for by an NHRA employee but were never seen again. ....Tom

04-05-2009, 06:48 PM	#11
gmonde Senior Member Join Date: Nov 2007 Posts: 615 Likes: 56 Liked 165 Times in 59 Posts	Re: 290 amc stocker pistons? JE and DIAMOND are paying ,had JE send my pistons with out the part number etched in them ,had to send them back double check what you get gmonde Last edited by gmonde; 04-05-2009 at 06:50 PM.

04-05-2009, 11:21 PM	#12
greg fulk VIP Member Join Date: Jan 2003 Location: jackson Posts: 1,165 Likes: 0 Liked 5 Times in 3 Posts	Re: 290 amc stocker pistons? Diamond is off the hook! totaly great looking pice if ya have the money! __________________ Greg Fulk 308 308X P/SA "ALL AMERICAN"